DC Shunt

We are a leading Manufacturer of 50a dc shunt from Noida, India.

50A DC Shunt

REQUEST CALLBACK

Get Best Quote

Approx. Rs 300 / PieceGet Latest Price

Product Brochure

Product Details:

Current Rating	50 A
Temperature (deg. Celsius)	Calibration 20 C
Material	brass
Voltage (V)	100mv
Current	5A to 15000A
Grade	DC
Working range	20 C to 60 C

We manufacture all our DC shunts as per well defined standards like IS: 1248. Further, our products are available for current ratings from 5A to 15000A with mV drops of 50 – 150mV. Also, our shunts comprise manganin rods/wire soldered or silver brazed to Brass/ Copper Blocks. In addition, these shunts are artificially aged and tested for full load.

Application:

Our range of products finds various usage for measuring current in DC applications. This is achieved by connecting these shunts to moving coil panel meters, digital meters or other measuring devices. Further, our devices are used in applications of control devices like power supplies and Battery chargers or for over Load Protection.

Technical Specifications:

Accuracy Class	1 or 0.5
Over load	Shunts are capable of with standing temperatures upto 120º C without any permanent alteration in physical or electrical properties. Over loads and faults which results in temperature of this magnitude are safely handled by our shunts.
Temperature Co efficien	0.002% per degree centigrade, above ambient temperature in still air, with free ventilation, temperature not exceeding 120º C at the centre and 90ºC at the ends.
Insulation	Shunts are supplied un insulated and protection against contact should be installed where applicable.
Over loads (Brass Ended)	Continuous 1.2 x Rated Current, 5 seconds
5 seconds	10 x Rated Current upto 5 seconds 4 x Rated Current upto 30 seconds
Ambient Temperatures	Calibration 20ºC
Working Range	20 ºC + 60 ºC

Types:

Compact Brass Ended:

Owing to the small size of these shunts, these are often serves its purposes in special applications. Further, these devices are in compliance with IEC: 51 Class-1. Also, these are current rated from 5-50A with 25, 50, 60, 75, and 100mV output.

Standard Brass Ended:

We manufacture a range of these devices, which are heavy duty type, providing accurate DC mille Volt signal. These devices are best suited for applications in measuring instruments and circuits, manufactured as per IS: 1248, Class-1 or Class 0.5. Further, the ratings range from 5A- 15000A and 50- 300mV output.

Installation:

In order to dissipate maximum heat, shunts are mounted in the horizontal manner, with the blade standing vertical. Further, ample ventilation is provided by utilizing the full end block surface area. Also, by applying a thin coat of silicon grease over the contact surface area, bus bar is adequately rated. In addition, the usage of flat and tension washers under the nuts, tighten completely.

Yes! I am Interested

Looking for DC Shunt ?